covered electrode
英 [ˈkʌvəd ɪˈlektrəʊd]
美 [ˈkʌvərd ɪˈlektroʊd]
网络 药皮焊条; 焊条; 电焊条
双语例句
- Low hydrogen type covered electrode
大电极型弧阻式电炉低氢型涂料电弧焊条 - Stability of Double Wires Narrow-gap Gas Metal Arc Welding low hydrogen type covered electrode
双丝窄间隙熔化极气体保护焊的焊接稳定性低氢型涂料电弧焊条 - Development of Covered Electrode for High Strength Steel and Its Technology Test of Weld
高强钢焊条的研制及焊接工艺试验 - Research on Low Cellulose Type Covered Electrode for All Position and Vertical Down Welding
低纤维素型全位置立向下焊条的研究 - The covered electrode can be used to weld the important structure and has good technological properties.
所研制的稀土高效铁粉焊条工艺性能良好，焊缝金属低温韧性好，可用于重要结构的焊接。 - Development of Hardfacing Covered Electrode with High Strength and High Toughness
高强高韧堆焊焊条研制 - In the past using traditional photoelectric oscillograph or high speed photography to evaluate usability-stability stainless steel covered electrode. The speed is slow and result is not precise to use photoelectric oscillograph and high speed photography is not been popularized. The two methods can but elicit qualitative concept.
对于判定不锈钢焊条工艺稳定性的方法，过去一直采用传统的光电示波器或通过高速摄影来判定，光电示波器速度慢、不精确，高速摄影技术又难以被普及采用，并且以上方法都只能得出定性的概念。 - Design and application of small covered electrode extruder
小型焊条压涂机设计与应用 - It is a new approach for the formula of covered electrode by introducing computer aid optimize design.
本文从理论上提出计算机辅助设计对焊条进行配方优化设计方法，为焊条的研制提供一条新途径。 - Forecast for Formula of Covered Electrode Based on Composition of Weld Line
基于焊缝成分的焊条配方预测 - The gas bubble fled from the anodic surface involves equal mass at lower current densities or electrode potential and the area covered by the bubble increases with increasing current densities and electrode potentials.
在较低的电流密度和电极电位下，离开阳极表面的气泡质量相等；阳极气泡覆盖电极表面面积随电流和电位的升高而增大。 - The top plate is a glass plate covered with transparent ITO as the ground electrode;
上极板采用ITO透明导电玻璃板作为地电极； - The high strength and high toughness hardfacing covered electrode to the medium-high carbon alloy steel surface 'repair was put forward in this paper.
本文针对焊缝熔敷金属在高强时，容易开裂问题展开研究，研制了中、高碳合金钢工件表面修复的高强、高韧新型堆焊焊条。 - Continuous determination of mercury and gold by spectrometry with a covered electrode
汞和金的加罩电极光谱连续测定 - Experimental study on operative performance of high cellulose covered electrode for pipe welding
管道用高纤维素焊条工艺性试验 - Study on three types of covered electrode with the alloy system of Cr-Ni 、 Cr-Co and Ni-Co was carried out respectively.
在此基础上研制成了三种合金系列的焊条，其基础成分分别为Cr-Ni系、Cr-Co系和Ni-Co系。 - In neutral Na_2SO_4 solution, it has been shown that the interfacial capacitance is due to Fe ( OH)_2 product covered on the iron electrode.
而铁电极在中性Na2SO4溶液中的界面电容为铁电极上覆盖的Fe（OH）2的电容。 - Development of hard surfacing covered electrode with medium-hardness for repairing tank parts
坦克零件修复专用中硬度堆焊焊条的研制 - These conclusions can provide an experimental and theoretical base for correctly choosing covered electrode and working out the welding procedure of high carbon steel.
所得结论，为正确选用焊条及制定高碳钢的焊接工艺提供了试验和理论依据。 - Usability-stability is all a pivotal problem of development of stainless steel covered electrode. In several influence factors of usability-stability stainless steel covered electrode, Metal transfer form is a crucial factor.
工艺稳定性差一直是制约不锈钢焊条发展的一个突出问题，在影响不锈钢焊条工艺稳定性的若干因素中，熔滴过渡形态是一个决定性的因素。 - A new kind of DS-10 hard surfacing welding special covered electrode which has Cr-Mn Alloy system, titanium-calcium type coated materials and medium hardness is developed.
针对装甲车辆的齿轮轴等重要零件的磨损情况，研制了一种新型Cr－Mn系统钛钙型中硬度DS－10堆焊专用焊条。 - Based on SiO_2-TiO_2-MgO-FeO slag system, a great deal of operative performance experiments for high cellulose covered electrode were carried out. The feature of metal transfer of the electrode was revealed.
针对高纤维素焊条的工艺性，进行了大量的试验研究。确定了基于SiO2-TiO2-MgO-FeO渣系焊条配方，揭示出高纤维素焊条的熔滴过渡形态特征。 - Simultaneous determination of thirty-seven elements in regional geochemical prospecting samples by spectrometry with a covered electrode
区域化探样品中37种元素的加罩电极光谱同时测定 - Usability evaluation of low hydrogen type construction steel covered electrode
低氢型结构钢焊条的工艺性判定 - The great progress in welding consumables has been made in China and the outputs of production and consume of covered electrode are as the largest in the world.
焊接材料的发展在我国已取得长足的进步，焊条的产量和消费量居世界第一。 - SEM and cyclic voltammetry were used to analyze the structure, surface morphology and composition of the electrodes. It was found that the surface of nickel foam was completely covered by Au layer for the Au/ Ni electrode prepared by electrodeposition.
利用SEM、循环伏安图分析了电极的结构、表面形态以及沉积层的物相成分，发现电沉积法制备的电极，泡沫镍表面被致密的金覆盖。 - In this paper, measure results are described, arc physics characteristic and usability of covered electrode are analyzed, and preparations of theories and trail data for establishing evaluation system of usability of covered electrode on the basis of ANALYSATOR HANNOVER are made.
论文对测试的结果进行描述，对被测焊条电弧物理特性和焊接工艺性进行了分析，为建立基于汉诺威焊接参数分析仪的焊条工艺水平的评价体系做了理论和试验资料的准备。